DPRG
DPRG List  



DPRG: BOUNCE dprglist@dprg.org: Non-member submission from [Daniel Herrington <daniel@adc.nsc.com>]

Subject: DPRG: BOUNCE dprglist@dprg.org: Non-member submission from [Daniel Herrington <daniel@adc.nsc.com>]
From: Jim Brown jbrown at cyberramp.net
Date: Thu Feb 19 19:13:09 CST 1998

>From: owner-dprglist at dprg.org
>Date: Thu, 19 Feb 1998 08:39:31 -0600
>X-Authentication-Warning: horta.ncc.com: mail set sender to
owner-dprglist at dprg.org using -f
>To: owner-dprglist at dprg.org
>Subject: BOUNCE dprglist at dprg.org:    Non-member submission from [Daniel
Herrington <daniel at adc.nsc.com>]   
>
>>From dprglist-owner at horta.ncc.com  Thu Feb 19 08:39:29 1998
>Received: from nimon.ncc.com (nimon.ncc.com [199.1.173.2])
>	by horta.ncc.com (8.8.5/8.8.5) with SMTP id IAA09785
>	for <dprglist at horta.ncc.com>; Thu, 19 Feb 1998 08:39:26 -0600
>Received: from daniel at adc.nsc.com [205.227.60.66] by nimon.ncc.com (OS/2
NCCmail v0.33) with SMTP
>          for dprglist at dprg.org; Thu, 19 Feb 98 08:20:51 CST
>Received: (from uucp at localhost) by gatekeeper2.nsc.com (8.6.12/8.6.11) id
GAA29679 for <dprglist at dprg.org>; Thu, 19 Feb 1998 06:36:33 -0800
>Received: from nsc.nsc.com by natsemi3-bh.nsc.com via smap (3.2)
>	id xma029666; Thu, 19 Feb 98 06:36:21 -0800
>Received: from adc.nsc.com by nsc.nsc.com (5.65/1.34) with SMTP
>	id AA21588 for dprglist at dprg.org; Thu, 19 Feb 98 06:36:20 -0800
>Received: from nueches.nsc.com by adc.nsc.com (SMI-8.6/SMI-SVR4)
>	id IAA02378; Thu, 19 Feb 1998 08:35:32 -0600
>Received: by nueches.nsc.com (SMI-8.6/SMI-SVR4)
>	id IAA16492; Thu, 19 Feb 1998 08:35:37 -0600
>Date: Thu, 19 Feb 1998 08:35:37 -0600
>Message-Id: <199802191435.IAA16492 at nueches.nsc.com>
>Mime-Version: 1.0
>Content-Type: text/plain; charset=us-ascii
>Content-Transfer-Encoding: 7bit
>From: Daniel Herrington <daniel at adc.nsc.com>
>To: dprglist at dprg.org
>Cc: daniel at adc.nsc.com
>Subject: 16" dia. clear acrylic dome?
>X-Mailer: VM 6.22 under 19.15 XEmacs Lucid
>
>Hi.
>
>Anyone know where I can find a 16" clear acrylic dome for my robot?
>I've seen them in Edmund Scientific's catalog, but they're $82.95!  I
>checked a couple of local plastics companies, but no luck.  Any ideas
>where I might look next?
>
>Regards,
>   Daniel Herrington
>   daniel at adc.nsc.com
>
>
>
>
- - - ____ - - - - - - ___ - - - - - - - - - - - - - - - - - - - - - - - - - -
    \/\_\@  ____    /  /\ __  ___          ___    http://www.dprg.org 2-21
    / / /\ / / /\  /--/ //\_\/\_/\ /\/\/\ /\_/\  jbrown at cyberramp.net
/__/ / / // / / / /__/ // / /__/ //_/_/ // // / (972)519-2868, (972)495-3821
\__\/  \/ \/\/\/  \__\/ \/  \__\/ \_\_\/ \/ \/ jgbrown at spdmail.spd.dsccc.com
http://www.cyberramp.net/~jbrown www.geocities.com/TimesSquare/Castle/6818

------------------------------

More information about the DPRG mailing list