DPRG
DPRG List  



[DPRG] Re: Controlling servos

Subject: [DPRG] Re: Controlling servos
From: Jim Brown james_121 at yahoo.com
Date: Wed Aug 9 21:21:04 CDT 2000

You might find what you're looking for at
http://www.boondog.com


--- Rupp <ruppent at earthlink.net> wrote:
> > Jim,
> >
> > I believe I had corresponded with you a few years ago
> when you and I
> > were using the same ISP there in Dallas. We've since
> moved to Virginia
> > (3 yrs ago) and really like it here.
> >
> > I was scouring the internet for an answer and came
> across your name at
> > http://robotstore.com/. I've flown R/C airplanes for
> years and want to
> > use the servos in a computer project. I understand the
> pulse-width
> > timing required to drive servos. My task is to control
> two servos from
> > my parallel port. The problem comes from the timing in
> the program. I
> > regularly program in Visual Basic but do not do any
> timing-specific
> > stuff. Are there any code snipits available that folks
> use to drive a
> > parallel port connected to servos? Pointing me in the
> general vicinity
> > would be a great help. Thanks in advance for any
> assistance you can
> > provide.
> >
> >    Rance Rupp
> 
> 
> 


=====
------------------------------------------------------
Jim Brown      james_121 at yahoo.com

jimgbrown at home.com http://members.home.net/jimgbrown
jim_brown at adc.com jbrown at dprg.org  http://www.dprg.org

__________________________________________________
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/


More information about the DPRG mailing list