DPRG
DPRG List  



[DPRG] Motor Control Starter Kit Release

Subject: [DPRG] Motor Control Starter Kit Release
From: Mohamad Haidar mptr2000 at yahoo.com
Date: Tue May 2 10:29:18 CDT 2000

Hello,

DDI Technologies is honored to announce the official
release of the Motor Control Starter Kit. We have the
full kit at Tanners Electronic and there is a $10
rebate for all DPRG members who are interested in the
full kit. 

The Motor Control Starter Kit is an educational
tool. The perfect introductory Kit for motor control.
Comprehensive material to be taught in school
environment. Well tailored and designed to benefit
teachers and students alike.					
Please, refer to the information below and to our
web site at: http://www.dditechnologies.com 					
DDI Technologies
Mohamad Haidar
mohamadhaidar at yahoo.com
P.O.Box 166161
Irving,TX 75016

**************************************************
       MOTOR CONTROL STARTER KIT

       INCLUDES:

DSMD KIT: Digital Stepper Motor Driver

DCMD KIT: Digital DC Motor Driver

MCIT LAB TUTORIAL: Motor Controller & Isolation
Tutorial Disk ver. 1.0 with MCIT Lab Manual

info at dditechnologies.com
**************************************************
       DSMD KIT

Digital Stepper Motor Driver

The DSMD Kit is a 4 bit stepper motor driver with Opto
isolation. It accepts a 4 bit digital signal that
drives a Stepper Motor. The board design provides
total isolation between the TTL side "input" and the
motor side "output".
The DSMD Kit requires two power supplies, one on the
TTL logic side and one on the output side. Allowing a
range between 5 volts to 30 volts.

* TOTAL ISOLATION: 
The DSMD Board utilizes Opto-Isolators to achieve
total isolation between the input and output. This
eliminates any noise or negative feedback generated by
the motor, which provides total protection to the 
Micro-controller or PC.

The Kit includes: 
   1- DSMD "Etched PCB" board.
   2- All components required for the board.
   3- DSMD Manual (a step by step guide).
**************************************************
       DCMD KIT

Digital DC Motor Driver

The DCMD Kit is a 2 bit DC motor driver with Opto
isolation. It accepts a 2 bit digital signal that
drives a DC Motor. The board design provides total
isolation between the TTL logic side "input"' and the
motor side "output".
The DCMD Kit requires two power supplies, one on the
input side and one on the output side. Allowing a
range between 5 volts  to 30 volts.

* TOTAL ISOLATION: 

The DCMD Board utilizes Opto-Isolators to achieve
total isolation between the input and output. This
eliminates any noise or negative feedback generated by
the motor, which provides total protection to the 
Micro-controller or PC.

The Kit includes: 
   1- DCMD "Etched PCB" board.
   2- All components required for the board.
   3- DCMD Manual (step by step guide).
**************************************************
       MCIT LAB TUTORIAL

Motor Controller & Isolation Tutorial Disk ver. 1.0
with MCIT Lab Manual

MCIT 1.0 with a Lab Manual:

MCIT is the perfect introductory lab for motor
control. Comprehensive material to be taught in school
environment. Well tailored and designed to benefit
teachers and students alike.
MCIT 1.0 is a tutorial disk which includes 10 8051 or
compatible programs, a tutorial power point
presentation, and detailed information on each
program. 
MCIT 1.0 Lab Manual has 10 Labs to be implemented in
the use of DSMD and DCMD Board Kits. It is the perfect
solution to learn about Robotic platforms and motor
controls.
The power point presentation is a well designed
introduction into the world of stepper and DC motor
control, with the emphasis on Opto-isolation.

The Kit includes: 
1- A Presentation Tutorial, which talks about stepper
motors, DC motors, Isolation, and Relays.
Phase I: Motor Control
		a- Stepper Motors
		b- DC Motors
Phase II: Isolation and Components
		a- Opto-Isolation
		b- Relays
		c- Tip 122
		d- Parallel Port Interface
2- Lab Manual. 10 detailed labs, which offer hands
on training and presentation.
DSMD Lab 1:  DSMD Kit Assembly 
DSMD Lab 2:  DSMD Kit Testing 
DSMD Lab 3:  Interfacing with Unipolar Stepper Motor
DSMD Lab 4:  Frequency and Speed Manipulation 
DSMD Lab 5:  Timing and Motion Control 
DSMD Lab 6:  Keypad Interface - DSMD 
DCMD Lab 7:  DCMD Kit Assembly 
DCMD Lab 8:  DCMD Kit Testing 
DCMD Lab 9:  DC Motor Control 
DCMD Lab 10: Keypad Interface - DCMD 
 
3- Five Stepper Motor 8051 Assembly Language
Programs.
4- Five DC Motor 8051 Assembly Language Programs.
**************************************************


=====
////////////////////////////////////////////////////////////
http://www.dditechnologies.com
////////////////////////////////////////////////////////////

__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/


More information about the DPRG mailing list