DPRG
DPRG List  



[DPRG] Fwd: H-bridge help

Subject: [DPRG] Fwd: H-bridge help
From: Robert L. Jordan rljordan at airmail.net
Date: Fri Oct 27 21:52:11 CDT 2000

Matt,

See if this info will help you.
http://www.robotclass.com/workshops/hbridge/index.html

I'd use a small 12volt DPDT relay to reverse the fan, if the motor "trigger" output signal (?) will drive it.
If it will drive a small light bulb then likely it will drive the relay.

Just wire up the fan through the relay so the DC reverses when the relay is on.

Regards
Robert

-----Original Message-----
>From:	Jim Brown [SMTP:james_121 at yahoo.com]
Sent:	Friday, October 27, 2000 6:13 PM
To:	dprglist at dprg.org
Subject:	[DPRG] Fwd: H-bridge help


--- Matt McCabe <matt at caber.com> wrote:
> From: "Matt McCabe" <matt at caber.com>
> To: <jbrown at dprg.org>
> Subject: H-bridge help
> Date: Fri, 27 Oct 2000 16:11:15 -0700
> 
> Jim,
> 
> I looking for some help in designing a circuit. If you
> have a moment to
> point me in the right direction, I'd be grateful.
> 
> I'm building a motorcycle fan control.  When at traveling
> at low speed, the
> radiator fan should reverse direction.  Trigger circuit
> has been designed
> seperately, based on engine RPM.
> 
> What I need help with is how to take the trigger input
> and reverse the
> polarity to the fan motor.  Load is 1.5-2.0 Amp.  12VDC
> circuit.
> 
> 
> Thanks in advance,
> Matt McCabe
> 
> 
> 


=====
------------------------------------------------------
Jim Brown      james_121 at yahoo.com

jimgbrown at home.com http://members.home.net/jimgbrown
jim_brown at adc.com jbrown at dprg.org  http://www.dprg.org

__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf!  It's FREE.
http://im.yahoo.com/

_______________________________________________
DPRGlist mailing list
DPRGlist at dprg.org
http://nimon.ncc.com/mailman/listinfo/dprglist



More information about the DPRG mailing list