DPRG List  

[DPRG] Group Buy - PVC Sintra plastic sheeting

Subject: [DPRG] Group Buy - PVC Sintra plastic sheeting
From: Ralph Tenny rten at metronet.com
Date: Fri Jul 13 13:31:45 CDT 2001

Robert (or anyone who has seen the Sintra stock):
Can you confirm the 3/8" dimension? I was expecting 1/4", approximately.

On Thu, 12 Jul 2001, Robert L. Jordan wrote:

> RE: Group Buy - PVC Sintra white plastic sheeting
> ******************************************************************************
> *** A big THANK YOU to Bill Boyer (Alias Rodent) for all the work  ***
> ******************************************************************************
> The PVC plastic sheeting (Sintra) is cut into 2 foot by 2 foot pieces.
> I believe it is about 3/8" thick, likely a millimeter size,
> and should sell for $10.00 each, to DPRG club members.
> Cash or check to Dallas Personal Robotics Group.
> This is about 1/3 or less what we could get it for anywhere else.
> Teresa & Travis Trotman have some PVC plastic and will have it at the
> August monthly meeting. 
> Bill Boyer has a stack. Daweasel at Swbell.Net Buy from either
> source.
> I will try to get some to the next RPL at Collin Creek Mall Thursday  at11:45.
> The sheeting will likely go fast as it is easy to work with, light, and 
> great for building robots, etc.
> Regards
> Robert L. Jordan
> DPRG Prez.2001
> -----Original Message-----
> From:	ttrotman at aep.com [SMTP:ttrotman at aep.com]
> Sent:	Thursday, July 12, 2001 1:46 PM
> To:	Dallas Personal Robotics Group
> Subject:	Re: [DPRG] PVC
>  << File: ATT00001.html >> FYI, I have picked up about half of the PVC, cut in 2'x2' squares, from 
> Bill Boyer.  If anyone is anxious to obtain some, let us know.  I work 
> downtown and live near Preston & NW Hwy.  We don't always check e-mail at 
> home very frequently (travistrotman at aol.com) so you may want to contact me 
> at my office (ttrotman at aep.com) but please limit its use. 
> Travis and I expect to take whatever is left to the August meeting (no 
> worthy conflicts so far).
> Bob Jordan,  Bill did not want me to pay him for the PVC.  I presume you would want 
> me to collect a check payable to DPRG or cash from anyone wanting a 
> square.  Please advise along with the amount.
> Regards,
> Teresa
> _______________________________________________
> DPRGlist mailing list
> DPRGlist at dprg.org
> http://nimon.ncc.com/mailman/listinfo/dprglist

More information about the DPRG mailing list