DPRG
DPRG List  



[DPRG] Making L298 and L297 work (fwd)

Subject: [DPRG] Making L298 and L297 work (fwd)
From: Kipton Moravec kip at kdream.com
Date: Sat Nov 17 09:39:37 CST 2001

Get the documentation on the chips and look for application notes.  You
should be able to figure it out from there.

Kip

----- Original Message -----
>From: "Eric Yundt" <eric at facetcorp.com>
To: "Dallas Personal Robotics Group" <dprglist at dprg.org>
Sent: Saturday, November 17, 2001 9:27 AM
Subject: [DPRG] Making L298 and L297 work (fwd)


> Forwarded on behalf of Cedar...
>
> Cedar Vandergon wrote:
> > From: Cedar Vandergon <CVandergon at par.com>
> > To: "'jbrown at dprg.org'" <jbrown at dprg.org>
> > Subject: Making L298 and L297 work
> > Date: Fri, 9 Nov 2001 14:05:32 -0600
> >
> > Hello,
> >
> > I am a student at the University of Minnesota working on a robot
project.  I
> > have a mechanism with an input crank (powered by a stepper motor) and a
> > smaller stepper motor used to rotate the mechanism.  The only experience
I
> > have is with the Basic Stamp board by Parallax.  I am wondering if you
could
> > give me some tips of how to get started in building a simple motor
> > controller.  Due to my lack of experience it would be very helpful to
have a
> > simple setup.  If you do not have time to send me any tips that is fine.
I
> > will give credit in my paper writeup to anyone who can help me.
> >
> > Thank you for your time,
> >
> > Cedar Vandergon
> > PaR Systems, Inc.
> > I.S. Department Intern
> > Email:   cvandergon at par.com
> > cvandergon at tc.umn.edu
> > Phone: (651) 484-7261 ext.5414
> > Home: (612) 379-3214
> > Cell:     (612) 207-7254
> >
> _______________________________________________
> DPRGlist mailing list
> DPRGlist at dprg.org
> http://nimon.ncc.com/mailman/listinfo/dprglist


More information about the DPRG mailing list