DPRG
DPRG List  



[DPRG] RF RS-232 Modules

Subject: [DPRG] RF RS-232 Modules
From: Mike McCarty jmccarty at ssd.usa.alcatel.com
Date: Mon Feb 11 13:57:39 CST 2002

On Fri, 8 Feb 2002, Rodent wrote:

> Nope. The RWS / TWS pair we have been discussing are in the 400 MHz band.
> Not sure what Lynx offers as they were only mentioned if someone wanted a
> higher quality setup.

I dunno what you've been reading, but the "THEY" in the first line
under the "Orginal Message" line below was Radiometrix, not Lynx.

> ----- Original Message -----
> 
> > > They make modules on two different frequencies -- just get one RX / TX
> pair
> > > on each frequency. Of course LYNX or someone similar has some
> transceivers
> > > that are fairly decently priced also. You would have use a 3rd pin to
> switch
> > > modes or fabricate and automatic rx / tx switch.
> > >
> > > For wireless debugging all you need is a transmitter on the robot and a
> > > receiver on the PC. It gets much more complicated if you want to do
> wireless
> > > programming.
> >
> >
> > What I see is that, unless one orders a special part, there is only one
> > frequency available. In Europe, that frequency is 869.85 MHz, and in
> > North America that frequency is 914.5 MHz.
> >
> > Mike
> > --
> > char *p="char
> *p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);}
> > This message made from 100% recycled bits.
> > I can explain it for you, but I can't understand it for you.
> > I don't speak for Alcatel      <- They make me say that.
> >
> > _______________________________________________
> > DPRGlist mailing list
> > DPRGlist at dprg.org
> > http://nimon.ncc.com/mailman/listinfo/dprglist
> 
> 
> _______________________________________________
> DPRGlist mailing list
> DPRGlist at dprg.org
> http://nimon.ncc.com/mailman/listinfo/dprglist
> 


More information about the DPRG mailing list