DPRG
DPRG List  



[DPRG] RE: Atmel AVR Programming Problems

Subject: [DPRG] RE: Atmel AVR Programming Problems
From: rten at new.metronet.com rten at new.metronet.com
Date: Wed Oct 8 17:33:01 CDT 2003

Rick:
If it isn't imnoral or illegal, don't worry abput it! There is so much
good info here that it becomes a valuable resource for everyone.
Ralph

On Wed, 8 Oct 2003, Rick J. Bickle wrote:

> You know, I have this tendency to think of this list as kind of a
> private area, although I know better. I constantly search the internet
> for information on some circuit, or component, and constantly come up
> with hits on messages from the DPRG list. Several times, I got hits on
> my own messages!
>
> Kind of makes you think more carefully about what you post.
>
> -Rick
>
>
> -----Original Message-----
> From: dprglist-admin at dprg.org [mailto:dprglist-admin at dprg.org] On Behalf
> Of Earl Bollinger
> Sent: Tuesday, October 07, 2003 11:01 PM
> To: 'dprglist-request at dprg.org'
> Subject: RE: [DPRG] RE: Atmel AVR Programming Problems
>
>
> It is nice to hear from someone so far away.
> Thanks for the information.
> DPRG gets all over the world.
> I guess we better be careful what we say. :)
> Who knows who you could influence.
>
>
>
> -----Original Message-----
> From: dprglist-admin at dprg.org [mailto:dprglist-admin at dprg.org] On Behalf
> Of Juanjo Ruiz
> Sent: Tuesday, October 07, 2003 10:34 AM
> To: dprglist-request at dprg.org
> Subject: [DPRG] RE: Atmel AVR Programming Problems
>
> Hello from Argentina,
>
>       I have the same problems with the 1200®s a time ago, when use this
> for a speed controller for a electric R/C plane.
>
> and this is mi experience.
>
> 1-if you want to program with a PC and a generic program
>   using the parallel port (0 part programmer) , this working
>   only in a 386/486/ old pentiuns in pure DOS. not in a DOS
>   windows, (the avr2313 program fine in even a DOS windows).
>   so may be not program correctly the part, even i fry a couple
>   of parts doing testing.
>
> 2-If you want to program to intern clock, you can done this
>   whit a paralell program with 12V VPP, may be the Taffe programer
>   (you can download the files in www.dontronics.com) and write a
>   program to write the fuses bytes or you can wire a 80CXX to done
>   the job , but you still need to use 12 V VPP. (i use this method
>   if you like i can send the assembler 8052 code to write the fuses.
>
> 3-The best and cheap programmer for the AVR®s in ISP mode, is descript
>   in the AVR910  of Atmel, i built 2 units from a Kit buy in the local
>   electronic store, and working very fine, can program directly from
>   AVR Studio, and the best is conected via RS-232, so the Machine
>   Speed or Windows are not a problem.
>
> 4-Please note. when you use the 1200®s with internal clock and
>   you use this to doing precise timing (measuring pulses, generating
>   signals, etc), and you use batt for supply this, the Clock frecuency
>   NOT IS CONSTANT, Vs VCC, so see this in the Data Sheets. (now i
>   testing a TINY12L whit internal clock).
>
> For last, Happy TACOS, our grup (not robotic) meet twice a month and we
> enyoy ASADOS (like a bbq®) the pictures are in www.smokealert.com.ar
>
> greetins
>
> Juan Jose
>
> pd. my english is very poor!!
>
>
> _______________________________________________
> DPRGlist mailing list
> DPRGlist at dprg.org http://nimon.ncc.com/mailman/listinfo/dprglist
>
>
> _______________________________________________
> DPRGlist mailing list
> DPRGlist at dprg.org http://nimon.ncc.com/mailman/listinfo/dprglist
>
> _______________________________________________
> DPRGlist mailing list
> DPRGlist at dprg.org
> http://nimon.ncc.com/mailman/listinfo/dprglist
>


More information about the DPRG mailing list