DPRG
DPRG List  



[DPRG] motor controllers to drive cordless drill motors

Subject: [DPRG] motor controllers to drive cordless drill motors
From: Doug Emes dougemes at gmail.com
Date: Mon Dec 27 16:28:31 CST 2010

I have some dimension engineering boards that would work too.  Sabertooth
2x25 and 2x5 and the Victor 884 (two) from IFI
On Dec 27, 2010 4:13 PM, "Tom Brusehaver" <cozytom at gmail.com> wrote:
> funny coincidence, the hackaday email I got just before your question
> was about driving cordless drills to build a segway like device. They are
> using the pololu 18v25.
>
> http://www.pololu.com/catalog/product/1455
>
> 9A at 24V? Then the one you specified would be adequate.
>
>
>
> On Mon, Dec 27, 2010 at 4:02 PM, blackstag <blackstag at gmail.com> wrote:
>> I have a couple cordless drill motors i would like to push. The max out
at
>> around 9A.  Would a motor controller like this work
>> fine http://www.pololu.com/catalog/product/757 and has anyone used one
for
>> such purpose?
>> Thanks,
>> Jason
>>
>> _______________________________________________
>> DPRGlist mailing list
>> DPRGlist at dprg.org
>> http://list.dprg.org/mailman/listinfo/dprglist
>>
>>
>
> _______________________________________________
> DPRGlist mailing list
> DPRGlist at dprg.org
> http://list.dprg.org/mailman/listinfo/dprglist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.dprg.org/pipermail/dprglist/attachments/20101227/138a4206/attachment.html

More information about the DPRG mailing list