DPRG
DPRG List  



[DPRG] motor controllers to drive cordless drill motors

Subject: [DPRG] motor controllers to drive cordless drill motors
From: blackstag blackstag at gmail.com
Date: Mon Dec 27 16:30:43 CST 2010

Thanks Doug was just looking at the sabretooths may have to pick one up.
Everyone else tahnks for the quick responses exactly what i was needing.



On Mon, Dec 27, 2010 at 4:28 PM, Doug Emes <dougemes at gmail.com> wrote:

> I have some dimension engineering boards that would work too.  Sabertooth
> 2x25 and 2x5 and the Victor 884 (two) from IFI
>  On Dec 27, 2010 4:13 PM, "Tom Brusehaver" <cozytom at gmail.com> wrote:
> > funny coincidence, the hackaday email I got just before your question
> > was about driving cordless drills to build a segway like device. They are
> > using the pololu 18v25.
> >
> > http://www.pololu.com/catalog/product/1455
> >
> > 9A at 24V? Then the one you specified would be adequate.
> >
> >
> >
> > On Mon, Dec 27, 2010 at 4:02 PM, blackstag <blackstag at gmail.com> wrote:
> >> I have a couple cordless drill motors i would like to push. The max out
> at
> >> around 9A.  Would a motor controller like this work
> >> fine http://www.pololu.com/catalog/product/757 and has anyone used one
> for
> >> such purpose?
> >> Thanks,
> >> Jason
> >>
> >> _______________________________________________
> >> DPRGlist mailing list
> >> DPRGlist at dprg.org
> >> http://list.dprg.org/mailman/listinfo/dprglist
> >>
> >>
> >
> > _______________________________________________
> > DPRGlist mailing list
> > DPRGlist at dprg.org
> > http://list.dprg.org/mailman/listinfo/dprglist
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.dprg.org/pipermail/dprglist/attachments/20101227/2259068d/attachment.html

More information about the DPRG mailing list