DPRG List  

[DPRG] 3D Printer from HP

Subject: [DPRG] 3D Printer from HP
From: Jon Hylands jon at huv.com
Date: Wed Sep 22 12:37:56 CDT 2010

On Wed, 22 Sep 2010 10:01:17 -0700, Chuck McManis
<cmcmanis at mcmanis.com> wrote:

>I thought this was great until I figured it probably meant it would only use $8000/lb HP approved ABS plastic cartridges 

My uPrint cartridges cost $1000 per box of five. Each cartridge has
about 30 cubic inches of material, so its about $6.67 per cubic inch.
The support material costs the same, btw.


More information about the DPRG mailing list