Using an Android Phone with Your Robot – Monthly Meeting Topic – March 9th, 2019

For tomorrow’s meeting Iron Reign will share information about how they use Android phones to run their robots. The presentation will be informal and off-the-cuff. It will discuss improvements to their competition robot since last presentation, but the emphasis will be a coding walk-through using the Android framework provided by FIRST – the STEM program in charge of their competition.
The walk-through will show some simplified examples. If you want to follow along on your own computers, you can install the tools and starter code below:
1. Download Android Studio – this is a free development environment based on jetbrains, the java sdks will come along for the ride
2. Download the ftc_app starter framework from github – this is starter codebase
3. Compile the app. This needs to be done ahead of time because it will fail multiple times as it figures out new dependencies that need to be downloaded.
There is a fair amount of downloading in all of those steps. We won’t have time to debug the install process for those trying it on their own. However, if you are able to follow along live, we might have a way for you to test a very basic teleop program.  Iron Reign plans to bring some robot phones and show how to debug wirelessly. If it doesn’t work for you, don’t worry about it – if folks are interested we can follow up at RBNO.

After the presentation there will be a show and tell, with a Donkey Car demo.
The meeting is at the Dallas Maker Space and starts at Noon on Saturday, March 9th. 

Useful OpenCV Routines for Hobby Roboticists – Monthly Meeting Topic – February 9th, 2019


DPRG’s February monthly meeting topic is “Useful OpenCV Routines for Hobby Roboticists”. Member Ray Casler will share his experiences using OpenCV on his robots .

His presentation will cover:

  • blob detection
  • LiDAR – IR filter and line laser
  • pixel diddling – Challenge line following strategy
  • using distance maps from Xbox Kinect sensors
  • object tracking

Many people interested in Donkey Car have started their builds. There will be a Donkey Car show and tell after Ray’s presentation. Bring your Donkey Car build and share your experiences.

The meeting is at the Dallas Maker Space and starts at Noon on Saturday, February 9th. 

Robot Showcase at DevFest 2018

Dev Fest Weekend (Dallas) was held on October 13th at the Microsoft campus in Irving. DPRG was there. The club presented a showcase of robots and competitions during the lunch session of the conference. Members demonstrated “Can-Can Soccer”, a competition where two robots autonomously collect cans from a 7′ X 10′ course and return them to their goal, and various levels of line following from simple to challenging. The showcase was viewed enthusiastically by many conference attendees with DPRG members fielding multiple questions about the robots and strategies used.

Below is a picture of members who participated in the showcase.

Left to right: Will Kuhnle, Steve Edwards, Ray Casler, Carl Ott, David Anderson, David Ackley, Scott Gibson (kneeling), John Kuhlenschmidt, Doug Paradis, Jack Jones, Clay Timmons, Ron Grant. Also attending was member Thomas Eriksson (not in picture).

LiDAR Overview – Monthly Meeting – April 14th, 2018

 

 

The April monthly meeting topic was LiDAR. Carl Ott led the meeting by presenting an LiDAR overview. Carl was followed by Doug Paradis, who discussed the ST VL53L0X and VL53L1X sensor boards available to the hobbyist roboticist. Doug also presented some data from tests he conducted on the Benewake TF-mini LiDAR unit that had just came out at the time of this presentation.

The meeting was held on April 14th, 2018 at the Dallas Maker Space starting at noon.

NOTE: This post was added at a later date to preserve the history of the club’s presentations.

Roborama 2017 Results

On the morning of May 13th, the Dallas Makerspace bustled with the excitement of competitors in the 22th annual Roborama. Activities started with a tour of the makerspace. Many of the competitors and their guests had never seen a makerspace and the creative possibilities displayed by the work of various makers was a real eye opener.

Each competitor or team was assigned a table area in the pit room where they fussed with final robot adjustments while checking in. At check in, robots were measured, weighted, and inspected to insure that they passed competition rules. By the time check in was finished, everyone was very excited.

In the Plastic Fastener Sumo contest, the quality of the robots was good. The impact of the learning from the Sumo/Line Following workshop, held a week before Roborama, was clearly evident. The competitors that had attended the workshop had taken to heart the best practices they had learned. As always the competition was fierce with several of the matches not decided until a final push by the winner.

The Line Following contest, the second part of the student portion of the of the competition, also showed improvement over past contests, with the winning robots achieving higher speeds. The contest doesn’t require the robots to be made from plastic fasteners, however all student competitors used them.

After the student portion of Roborama concluded, prizes were rewarded to the winners of the student portion of the competition. Each winner received a DPRG trophy and choice of a complete robot kit or a gift certificate provided by our sponsors. Kits and certificates were provided by Pololu, Parallax, REV Robotics, Tanners Electronics, RoboRealm. and Richard Neveau.

                          

                                            Trophies                                                                      Prizes
Winners

The unrestricted participation part of Roborama consisted of the contests Big Table Top 2 and Can Can Soccer. In Big Table Top 2, a robot must complete 4 tasks. The tasks are: return a can to the starting zone, knock a can off the table, place a can into an overhanging box on the side of the table, and use the two remaining cans to form a line with the can in the starting zone that a yard stick can lay over (cans must be at least 8 inches apart). The top prize for Big Table Top 2 was won by a visitor to Roborama from Vancouver Canada, Markus Lampert.  His robot, Freddie, achieved a perfect score with a hitchless performance on the 1st attempt. Freddie has a hand crafted frame made of jig sawed plywood, a very tight design that incorporates several IR sensors, and a unique fin style grabber using flexible 3d printed claws. Markus is a member of the Vancouver Robotics Club (www. vancouverroboticsclub.org). Second place was taken by Doug Paradis with his robot, Little Andy.

                          

                          Freddie dropping can over edge                       Freddie placing cans in a line

Can Can Soccer, where two robots go head to head in an non-aggressive test to collect cans, becomes more competitive and exciting with each repetition of the contest. The winner this year was Doug Paradis and his robot VEX Navigator. Vex Navigator is built with the VEX IQ system. It incorporates a CMUCAM5 Pixy to identify cans. The Pixy is connected via a TI MSP430 LaunchPad  board, using the techniques published by James Pearson, in his documentation of the VEX IQ Sensor Reference. Second and third places were won by Ray Casler and Scott Gibson. Ray’s robot, Rainman, sported several new modifications. The modifications included a beacon system to allow determination of location after a collusion event. Scott’s robot, Can Man, usually a truly strong contender, suffered from a flurry of undetermined problems that hampered performance. Markus Lampert’s robot, Freddie, also participated. Fredde made a good show, but did not place. The final bout pitted VEX Navigator versus Rainman. In the ending moments of the bout, Rainman and VEX Navigator targeted the same can. Time ended with Rainman trying to catch VEX Navigator as Navigator snatched the can and placed the winning can into the goal.

                         

                               Big Table Top 2 Winners                                   Can Can Soccer Winners

Trophies and prizes were handed out by DPRG President Steve Edwards.

Judges

Steve Edwards, David Ackley, and Richard Neveau were the judges for the event.

 

iMake 2017

iMake, a festival sponsored by the Fort Worth Museum of Science and History to celebrate the Maker movement, gives people a chance to be “a maker for a day”. The event collects demonstrations and on-hand activities created by a diverse group of organizations, and provides a venue for sharing them with young children and parents.

DPRG  manned a five table exhibit with interactive demonstrations of robots, Kinect, CNC drawing, 3D perspective tracking, LiDar, automated xylophone, Roborealm modeling, manual driven robot arm, and 3d printing.  Also, Big Robie made an appearance, all bright and shiny for this year’s event season.

The booth was crewed by Steve Edwards, Eric Chaney, Carl Ott, John  Kuhlenschmidt, Ray Caslier, and Doug Paradis. The all day event occurred on April 1, 2017.

Club Robot Build Session at theLab.ms

Mark your calendars! On Thursday, March 16th, DPRG will hold a robot build session at theLab.ms in Plano, TX between 6:30 PM an 11:00 PM. This is the first DPRG event at theLab.ms. The event’s purpose is to help people complete their club or other robot. However if you have another project, please feel free to come work on it and socialize. Everyone is welcome.